Tutorials — how to
Posted by Branden Walter on
Step 1: Disconnect batteries Step 2: Drain engine coolant. Step 3: Remove the plastic engine cover that is held in place by four8mm bolts. Note: The dipstick must be removed in order to remove the plastic engine cover. Step 4: Using an 11mm socket loosen the two V-band clamps. Remove the 10mm bolt in the center of the tube and disconnect the sensor plug. The EGR crossover tube can now be removed. Step 5: Remove the electrical connector on the EGR valve. Note: Some electrical connectors may have a locking tab. In order to remove these connectors the tab...
- Tags: better gas milage, cool temp, diesel, DIY, EGR, EGR delete, Engine, engine mod, how to, modification, more power, performance parts, prostreet, weekend Project